The PMC6-2 provides main-monitor scale, depth, and dynamics, and allows mix decisions to be made quickly, with absolute certainty and without fatigue.
This 3-way active monitor speaker combines two custom 6-inch ultra-long-throw bass-drivers with our radically engineered PMC55 2-inch soft-dome mid-range unit and a precision-built one-inch soft-dome tweeter. The PMC55’s distinctive ‘N-compass’ waveguide enhances the wide dispersion and remarkable mid-range projection of the driver; in combination with the high performance of the tweeter, the result is an ultra-wide and stable image, with a smooth and natural in-room response. Each bass driver is individually powered by a cutting-edge 400W Class-D amplifier and seamlessly integrated by our sophisticated, highly accurate DSP-based crossovers. As with the PMC6, the monitor is configured using rear-panel controls or the browser-based SoundAlign™ software, with comprehensive boundary and EQ options.
The PMC6-2 offers astonishing size-to-performance ratio thanks to its ATL™ bass-loading technology, which results in exceptional LF extension and consistent tonal balance at all listening levels. Our Laminair™ airflow technology, visible in the monitor’s hexagonal vent ducts, further reduces colouration and enhances dynamics and efficiency.
A simple upgrade path converts the PMC6-2 to a full-range XBD system; just add a PMC8.2 SUB and select XBD mode to perfectly dovetail the two units, extending the response down to 25Hz with additional headroom.
- Active 3-way nearfield reference monitor with ATL™ bass loading
- Frequency response: 33Hz - 25kHz (- 3dB @1m full space, on-axis)
- Max. cont. SPL: 109dB @1m (Half space value calculated as +3dB from full space measurement.
- Un-weighted input,20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- State-of-the-art Class-D amplifiers: HF 400W, MF 400W, LF 2x 400W
- Analogue / AES3 digital input (16/24-bit, 18 -192kHz sample rate)
- Digital ‘through’ output (AES3 24-bit 96kHz)
- SoundAlign™ network control interface for single or group EQ & settings
- Sophisticated DSP crossover, driver protection, EQ, and delay/polarity options
- PMC6-2 + PMC8-2 SUB = PMC6-2 XBD, with LF down to 25Hz & increased headroom
- Ceiling-mount yoke allows suspension in multi-channel or immersive systems
Specifications
- Type: Active 3-way nearfield reference monitor with ATL™ bass loading
- Drive Unit Complement:
- LF 2 x PMC 150mm (6”) studio 6 drivers
- MF PMC 55mm (2”) soft dome mid-range
- HF PMC 27mm (1”) soft dome tweeter
- Effective ATL™ Length2m (6.6ft)
- Frequency Response: 33Hz - 25kHz (- 3dB) (@1m full space, on-axis)
- Sensitivity: +4dBu input signal = 98dB SPL @ 1m
- Max continuous SPL109dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Max Peak SPL121dB @1m (Half space value calculated as +3dB from full space measurement. Unweighted input, 20-20kHz Pink Noise (IEC) with 12dB CF for 2 hours AES2-1984 duration)
- Directivity:
- H +/-50 degrees
- V +60/-40 degrees (-6dB off axis @10kHz)
- Input: XLR switchable between analogue & digital AES3
- Analogue input
- +20/+24dBu max. input level (selectable)
- 22K ohm input impedance
- Digital input
- 16/24-bit AES3 signal, left, right or left + right
- 18 - 192kHz Sample Rate
- 110 ohm input impedance
- Expansion card slot For future connectivity upgrades
- Output: XLR digital AES3 (fixed 24-bit @ 96kHz)
- Network: RJ45 for use with PMC SoundAlign web interface
- Features:
- Level Trim (+/-10dB)
- High-pass filter (20 - 200Hz, 12dB/Oct)
- Delay (0 - 30mS)
- Phase (normal or inverted)
- LF & HF shelving filters (20Hz - 20kHz, +/- 10dB, Q 0.707)
- Parametric EQ (5 bands, 20Hz - 20kHz, +/- 10dB)
- User presets (3 + factory defaults)
- Latency: 2.4mS
- Amplifier power per channel:
- LF 2 x 400Wrms
- MF 1 x 400Wrms
- HF 1 x 400Wrms
- Mains: 100 - 240VAC auto-switching, 50-60Hz (IEC C14)
- Power consumption (idle): 50W
- Power consumption (max): 1500W
- Cabinet dimensions:
- H 400mm (15.7”)
- W 430mm (16.9”)
- D 372mm (14.6”)
- Weight21.3kg (47lbs) each
- Available Finishes:Studio black
PDF
Herstellerinformationen
PMC
PMC ist einer der weltweit führenden Hersteller von Lautsprechersystemen mit Sitz im Vereinigten Königreich. Das Portfolio umfasst sowohl Abhörlautsprecher für anspruchsvollste Monitoring-Anwendungen als auch Lösungen für audiophile Anwender mit höchsten Ansprüchen, die zu Hause Musik so erleben wollen, wie sie vom Künstler erdacht worden ist. PMC setzt für alle Produkte auf die besten Werkstoffe und Design-Prinzipien. Dazu gehören beispielsweise die selbst entwickelte Advanced Transmission Line (ATL™) Technologie, topaktuelle Verstärkung und fortschrittliche DSP-Technik. Das Resultat sind Lautsprecher, die Musik genau so wiedergeben, wie sie erschaffen wurde – mit maximaler Auflösung und ohne Verfärbung oder Verzerrung.
Angaben zur Produktsicherheit
GPSR Information
Herstellerinformationen:
PMC
, ,
Durchschnittliche Artikelbewertung
Es gibt noch keine Bewertungen.
